Your trusted plumber in Leeds

Identifying the fault through testing and inspection, replacing broken components like thermostats or pump seals, and restoring safe operation. May involve parts replacement or cleaning.

When you need it. Boiler won't ignite, losing pressure, making strange noises, leaking water, or heating cuts out randomly.

Before you get in touch. Note any error codes on the display, check if the pilot light is on, and listen for specific sounds.

Locating the source of water escape, stopping the flow at the stopcock if needed, and carrying out temporary or permanent repairs to pipes, joints or fittings.

When you need it. Water spraying from pipes, pooling under floorboards, staining ceilings, or dripping persistently from joints.

Before you get in touch. Turn off the stopcock if water is spraying, mop up standing water, and note where the leak is coming from.

Locating the blockage using rods or cameras, clearing debris, grease or roots, and flushing the drain to restore flow. May require jetting or pipe removal.

When you need it. Toilets won't flush, sinks drain slowly, water backs up, or gurgling sounds come from drains.

Before you get in touch. Stop using the drain if possible, note which drains are affected, and describe what you've noticed.

Installing new systems from boiler to radiators with proper pipework, or repairing existing leaks, air locks, cold spots and valve faults to balance heat distribution.

When you need it. Some radiators stay cold, heating is uneven, system loses pressure, or radiators need bleeding.

Before you get in touch. Note which radiators are cold, check boiler pressure on the gauge, and bleed radiators if you can.

Removing old suites, installing new baths or showers, fitting basins and toilets, running pipework, sealing and tiling walls, and ensuring proper drainage and ventilation.

When you need it. Planning a bathroom renovation, replacing old or broken suites, or upgrading to a new shower or wet room.

Before you get in touch. Have measurements or photos of the space, know your water pressure type, and decide on layout and products.

Repair and installation of taps, isolating valves, stopcocks, waste pipes, and fixing leaks at joints, fittings or appliance connections throughout the home.

When you need it. Dripping taps, leaking under-sink pipes, no water to an appliance, or a faulty stopcock or isolation valve.

Before you get in touch. Identify which tap or pipe is affected, turn off water if it's a leak, and check if it's a slow drip or gush.